Patient Satisfaction With the Health Care Services of a Government-Financed Health Protection Scheme in Bangladesh: Cross-Sectional Study.

BACKGROUND: Since 2016, the government of Bangladesh has been piloting a health protection scheme known as Shasthyo Surokhsha Karmasuchi (SSK), which specifically targets households living below the poverty line. This noncontributory scheme provides enrolled households access to inpatient health care services for 78 disease groups. Understanding patients' experiences with health care utilization from the pilot SSK scheme is important for enhancing the quality of health care service delivery during the national-level scale-up of the scheme. OBJECTIVE: We aimed to evaluate patient satisfaction with the health care services provided under the pilot health protection scheme in Bangladesh. METHODS: A cross-sectional survey was conducted with the users of the SSK scheme from August to November 2019. Patients who had spent a minimum of 2 nights at health care facilities were selected for face-to-face exit interviews. During these interviews, we collected information on patients' socioeconomic characteristics, care-seeking experiences, and level of satisfaction with various aspects of health care service delivery. To measure satisfaction, we employed a 5-point Likert scale (very satisfied, 5; satisfied, 4; neither satisfied nor dissatisfied, 3; dissatisfied, 2; very dissatisfied, 1). Descriptive statistics, statistical inferential tests (t-test and 1-way ANOVA), and linear regression analyses were performed. RESULTS: We found that 55.1% (241/438) of users were either very satisfied or satisfied with the health care services of the SSK scheme. The most satisfactory indicators were related to privacy maintained during diagnostic tests (mean 3.91, SD 0.64), physicians' behaviors (mean 3.86, SD 0.77), services provided at the registration booth (mean 3.86, SD 0.62), confidentiality maintained regarding diseases (mean 3.78, SD 0.72), and nurses' behaviors (mean 3.60, SD 0.83). Poor satisfaction was identified in the interaction of patients with providers about illness-related information (mean 2.14, SD 1.40), availability of drinking water (mean 1.46, SD 0.76), cleanliness of toilets (mean 2.85, SD 1.04), and cleanliness of the waiting room (mean 2.92, SD 1.09). Patient satisfaction significantly decreased by 0.20 points for registration times of 16-30 minutes and by 0.32 points for registration times of >30 minutes compared with registration times of ≤15 minutes. Similarly, patient satisfaction significantly decreased with an increase in the waiting time to obtain services. However, the satisfaction of users significantly increased if they received a complete course of medicines and all prescribed diagnostic services. CONCLUSIONS: More than half of the users were satisfied with the services provided under the SSK scheme. However, there is scope for improving user satisfaction. To improve the satisfaction level, the SSK scheme implementation authorities should pay attention to reducing the registration time and waiting time to obtain services and improving the availability of drugs and prescribed diagnostic services. The authorities should also ensure the supply of drinking water and enhance the cleanliness of the facility.

Prevalence and factors associated with digital addiction among students taking university entrance tests: a GIS-based study.

BACKGROUND: The surge in digital media consumption, coupled with the ensuing consequences of digital addiction, has witnessed a rapid increase, particularly after the initiation of the COVID-19 pandemic. Despite some studies exploring specific technological addictions, such as internet or social media addiction, in Bangladesh, there is a noticeable gap in research focusing on digital addiction in a broader context. Thus, this study aims to investigate digital addiction among students taking the university entrance test, examining its prevalence, contributing factors, and geographical distribution using GIS techniques. METHODS: Data from a cross-sectional survey were collected from a total of 2,157 students who were taking the university entrance test at Jahangirnagar University, Bangladesh. A convenience sampling method was applied for data collection using a structured questionnaire. Statistical analyses were performed with SPSS 25 Version and AMOS 23 Version, whereas ArcGIS 10.8 Version was used for the geographical distribution of digital addiction. RESULTS: The prevalence of digital addiction was 33.1% (mean score: 16.05 ± 5.58). Those students who are attempting the test for a second time were more likely to be addicted (42.7% vs. 39.1%), but the difference was not statistically significant. Besides, the potential factors predicted for digital addiction were student status, satisfaction with previous mock tests, average monthly expenditure during the admission test preparation, and depression. No significant difference was found between digital addiction and districts. However, digital addiction was higher in the districts of Manikganj, Rajbari, Shariatpur, and Chittagong Hill Tract areas, including Rangamati, and Bandarban. CONCLUSIONS: The study emphasizes the pressing need for collaborative efforts involving educational policymakers, institutions, and parents to address the growing digital addiction among university-bound students. The recommendations focus on promoting alternative activities, enhancing digital literacy, and imposing restrictions on digital device use, which are crucial steps toward fostering a healthier digital environment and balanced relationship with technology for students.

Mitigating the Poisoning Effect of Formate during CO2 Hydrogenation to Methanol over Co-Containing Dual-Atom Oxide Catalysts.

During the hydrogenation of CO2 to methanol over mixed-oxide catalysts, the strong adsorption of CO2 and formate poses a barrier for H2 dissociation, limiting methanol selectivity and productivity. Here we show that by using Co-containing dual-atom oxide catalysts, the poisoning effect can be countered by separating the site for H2 dissociation and the adsorption of intermediates. We synthesized a Co- and In-doped ZrO2 catalyst (Co-In-ZrO2) containing atomically dispersed Co and In species. Catalyst characterization showed that Co and In atoms were atomically dispersed and were in proximity to each other owing to a random distribution. During the CO2 hydrogenation reaction, the Co atom was responsible for the adsorption of CO2 and formate species, while the nearby In atoms promoted the hydrogenation of adsorbed intermediates. The cooperative effect increased the methanol selectivity to 86% over the dual-atom catalyst, and methanol productivity increased 2-fold in comparison to single-atom catalysts. This cooperative effect was extended to Co-Zn and Co-Ga doped ZrO2 catalysts. This work presents a different approach to designing mixed-oxide catalysts for CO2 hydrogenation based on the preferential adsorption of substrates and intermediates instead of promoting H2 dissociation to mitigate the poisonous effects of substrates and intermediates.

Opsin expression varies across larval development and taxa in pteriomorphian bivalves.

Introduction: Many marine organisms have a biphasic life cycle that transitions between a swimming larva with a more sedentary adult form. At the end of the first phase, larvae must identify suitable sites to settle and undergo a dramatic morphological change. Environmental factors, including photic and chemical cues, appear to influence settlement, but the sensory receptors involved are largely unknown. We targeted the protein receptor, opsin, which belongs to large superfamily of transmembrane receptors that detects environmental stimuli, hormones, and neurotransmitters. While opsins are well-known for light-sensing, including vision, a growing number of studies have demonstrated light-independent functions. We therefore examined opsin expression in the Pteriomorphia, a large, diverse clade of marine bivalves, that includes commercially important species, such as oysters, mussels, and scallops. Methods: Genomic annotations combined with phylogenetic analysis show great variation of opsin abundance among pteriomorphian bivalves, including surprisingly high genomic abundance in many species that are eyeless as adults, such as mussels. Therefore, we investigated the diversity of opsin expression from the perspective of larval development. We collected opsin gene expression in four families of Pteriomorphia, across three distinct larval stages, i.e., trochophore, veliger, and pediveliger, and compared those to adult tissues. Results: We found larvae express all opsin types in these bivalves, but opsin expression patterns are largely species-specific across development. Few opsins are expressed in the adult mantle, but many are highly expressed in adult eyes. Intriguingly, opsin genes such as retinochrome, xenopsins, and Go-opsins have higher levels of expression in the later larval stages when substrates for settlement are being tested, such as the pediveliger. Conclusion: Investigating opsin gene expression during larval development provides crucial insights into their intricate interactions with the surroundings, which may shed light on how opsin receptors of these organisms respond to various environmental cues that play a pivotal role in their settlement process.

Plant-Based Decellularization: A Novel Approach for Perfusion-Compatible Tissue Engineering Structures.

This study explores the potential of plant-based decellularization in regenerative medicine, a pivotal development in tissue engineering focusing on scaffold development, modification, and vascularization. Plant decellularization involves removing cellular components from plant structures, offering an eco-friendly and cost-effective alternative to traditional scaffold materials. The use of plant-derived polymers is critical, presenting both benefits and challenges, notably in mechanical properties. Integration of plant vascular networks represents a significant bioengineering breakthrough, aligning with natural design principles. The paper provides an in-depth analysis of development protocols, scaffold fabrication considerations, and illustrative case studies showcasing plant-based decellularization applications. This technique is transformative, offering sustainable scaffold design solutions with readily available plant materials capable of forming perfusable structures. Ongoing research aims to refine protocols, assess long-term implications, and adapt the process for clinical use, indicating a path toward widespread adoption. Plant-based decellularization holds promise for regenerative medicine, bridging biological sciences with engineering through eco-friendly approaches. Future perspectives include protocol optimization, understanding long-term impacts, clinical scalability, addressing mechanical limitations, fostering collaboration, exploring new research areas, and enhancing education. Collectively, these efforts envision a regenerative future where nature and scientific innovation converge to create sustainable solutions, offering hope for generations to come.

In vitro regulation of gene expression of pregnancy-associated proteins and cytokines in bovine endometrial epithelial cells and bovine trophoblastic cells by infection with Neospora caninum.

Abortion caused by the parasite Neospora caninum is an important threat to the livestock industry worldwide. Trophoblasts and caruncular cells play major roles in initiating innate immune responses and controlling parasite infection at the fetal-maternal interface. In the present study, bovine uterine epithelial cells (BUECs) and bovine trophoblastic (BT) cells treated with bovine interferon-gamma (IFN-γ), IFN-alpha (IFN-α) and IFN-tau (IFN-τ) followed by infection with N. caninum were examined by measuring the mRNA expression levels of numerous pregnancy-associated proteins and observing parasite growth to elucidate the host-parasite interaction at the uteroplacental region. N. caninum infection increased the expression of prolactin-related protein 1 (PRP1), pregnancy-associated glycoprotein 1 (PAG1), and cytokines (TNF-α, IL-8 and IL-10) in BUECs and of IL-8 in BT cells. Bovine IFN-γ inhibited IL-8 and TNF-α expression in BUECs and IL-8 in BT cells. In contrast, the expression of the interferon-stimulated gene OAS1 was significantly increased by treatment of the infected BT cells with IFN-γ. However, treatment with bovine IFNs did not inhibit N. caninum growth in either cell line. In conclusion, our results suggest that bovine IFN-γ plays a crucial role in control of pathogenesis in uterus and induction of inflammatory response in the placental region following N. caninum infection, rather than growth inhibition of the parasites.

Assessment of the salt tolerance of diverse bread wheat (Triticum aestivum L.) genotypes during the early growth stage under hydroponic culture conditions.

Objectives: Soil salinity affects the growth of crop plants, leading to reduced productivity, and is a major challenge for wheat production worldwide. Various adaptations and mitigation approaches in combination with tolerant wheat genotypes can be useful for the sustainability of crop production in saline environments. However, the development of salt-tolerant wheat genotypes is one of the best and most efficient solutions for obtaining desirable yields. Considering these issues, an investigation was carried out under hydroponic nutrient culture conditions to assess the genetic variability and selection of salt-tolerant wheat genotypes by categorizing inequitable morphophysiological and genetic variability as well as multivariate analysis. Methods: To meet the objectives of this study, 100 wheat genotypes were tested hydroponically in 0 (control) and 15 dS m-1 salt solutions. Conclusion: For all the wheat genotypes grown under saline conditions, the shoot length (SL), root length (RL), shoot fresh weight (SFW), root fresh weight (RFW), total fresh weight (TFW), shoot dry weight (SDW), root dry weight (RDW), and total dry weight (TDW) decreased significantly. Furthermore, significant variation was observed among the genotypes in terms of their characteristics only under saline conditions. In the case of genetic diversity analysis, a high genotypic coefficient of variation (GCV), phenotypic coefficient of variation (PCV), genetic advance in the percentage of the mean (GAM) and high heritability (h2b) were recorded for all tested wheat genotypes based on the SDW, RDW and TDW. Correlation analysis for both genotypic and phenotypic relationships revealed strong positive correlations for TDW, SDW, TFW and SFW. Principal component analysis (PCA) revealed that TDW, TFW, SDW, and SFW were the most discriminative variables for the wheat genotypes, which was confirmed by discriminant function analysis (DFA). PCA-biplot analysis also revealed significant positive correlations between SDW and SFW and between TDW and TFW. Hierarchical cluster analysis was performed for ten clusters based on the relative performance of the genotypes, where the genotypes were characterized into salt-tolerant, medium-salt-tolerant, medium-salt-susceptible and salt-susceptible groups. Among the genotypes, G11, G25 and G29 under cluster VII were categorized as salt tolerant based on their outstanding performance in terms of characteristics only under saline conditions. D2 analysis proved that the wheat genotypes of this cluster were highly divergent from the other cluster genotypes; as a result, these genotypes might be utilized as parents in the development of salt-tolerant wheat genotypes. The current study concluded that SDW and TDW could be employed as criteria for selecting and defining salt-tolerant genotypes during the early growth stage of wheat.

Protocol for the Adolescent Menstrual Experiences and Health Cohort (AMEHC) Study in Khulna, Bangladesh: A Prospective cohort to quantify the influence of menstrual health on adolescent girls' health and education outcomes.

BACKGROUND: Menstrual health is essential for gender equity and the well-being of women and girls. Qualitative research has described the burden of poor menstrual health on health and education; however, these impacts have not been quantified, curtailing investment. The Adolescent Menstrual Experiences and Health Cohort (AMEHC) Study aims to describe menstrual health and its trajectories across adolescence, and quantify the relationships between menstrual health and girls' health and education in Khulna, Bangladesh. METHODS AND ANALYSIS: AMEHC is a prospective longitudinal cohort of 2016 adolescent girls recruited at the commencement of class 6 (secondary school, mean age=12) across 101 schools selected through a proportional random sampling approach. Each year, the cohort will be asked to complete a survey capturing (1) girls' menstrual health and experiences, (2) support for menstrual health, and (3) health and education outcomes. Survey questions were refined through qualitative research, cognitive interviews and pilot survey in the year preceding the cohort. Girls' guardians will be surveyed at baseline and wave 2 to capture their perspectives and household demographics. Annual assessments will capture schools' water, sanitation and hygiene, and support for menstruation and collect data on participants' education, including school attendance and performance (in maths, literacy). Cohort enrolment and baseline survey commenced in February 2023. Follow-up waves are scheduled for 2024, 2025 and 2026, with plans for extension. A nested subcohort will follow 406 post-menarche girls at 2-month intervals throughout 2023 (May, August, October) to describe changes across menstrual periods. This protocol outlines a priori hypotheses regarding the impacts of menstrual health to be tested through the cohort. ETHICS AND DISSEMINATION: AMEHC has ethical approval from the Alfred Hospital Ethics Committee (369/22) and BRAC James P Grant School of Public Health Institutional Review Board (IRB-06 July 22-024). Study materials and outputs will be available open access through peer-reviewed publication and study web pages.

Trends and challenges of fruit by-products utilization: insights into safety, sensory, and benefits of the use for the development of innovative healthy food: a review.

A significant portion of the human diet is comprised of fruits, which are consumed globally either raw or after being processed. A huge amount of waste and by-products such as skins, seeds, cores, rags, rinds, pomace, etc. are being generated in our homes and agro-processing industries every day. According to previous statistics, nearly half of the fruits are lost or discarded during the entire processing chain. The concern arises when those wastes and by-products damage the environment and simultaneously cause economic losses. There is a lot of potential in these by-products for reuse in a variety of applications, including the isolation of valuable bioactive ingredients and their application in developing healthy and functional foods. The development of novel techniques for the transformation of these materials into marketable commodities may offer a workable solution to this waste issue while also promoting sustainable economic growth from the bio-economic viewpoint. This approach can manage waste as well as add value to enterprises. The goal of this study is twofold based on this scenario. The first is to present a brief overview of the most significant bioactive substances found in those by-products. The second is to review the current status of their valorization including the trends and techniques, safety assessments, sensory attributes, and challenges. Moreover, specific attention is drawn to the future perspective, and some solutions are discussed in this report.

A novel investigation of pressure-induced semiconducting to metallic transition of lead free novel Ba3SbI3 perovskite with exceptional optoelectronic properties.

The structural, electronic, mechanical, and optical characteristics of barium-based halide perovskite Ba3SbI3 under the influence of pressures ranging from 0 to 10 GPa have been analyzed using first-principles calculations for the first time. The new perovskite Ba3SbI3 material was shown to be a direct band gap semiconductor at 0 GPa, but the band gap diminished when the applied pressure increased from 0 to 10 GPa. So the Ba3SbI3 material undergoes a transition from semiconductor to metallic due to high pressure at 10 GPa. The Ba3SbI3 material also exhibits an increase in optical absorption and conductivity with applied pressure due to the change in band gap, which is more suitable for solar absorbers, surgical instruments, and optoelectronic devices. The charge density maps confirm the presence of both ionic and covalent bonding characteristics. Exploration into the mechanical characteristics indicates that the Ba3SbI3 perovskite is mechanically stable. Additionally, the Ba3SbI3 compound becomes strongly anisotropic at high pressure. The insightful results of our simulations will all be helpful for the experimental structure of a new effective Ba3SbI3-based inorganic perovskite solar cell in the near future.

Hi-gMISnet: generalized medical image segmentation using DWT based multilayer fusion and dual mode attention into high resolutionpGAN.

OBJECTIVE: Automatic medical image segmentation is crucial for accurately isolating target tissue areas in the image from background tissues, facilitating precise diagnoses and procedures. While the proliferation of publicly available clinical datasets led to the development of deep learning-based medical image segmentation methods, a generalized, accurate, robust, and reliable approach across diverse imaging modalities remains elusive. APPROACH: This paper proposes a novel high-resolution parallel generative adversarial network (pGAN)-based generalized deep learning method for automatic segmentation of medical images from diverse imaging modalities. The proposed method showcases better performance and generalizability by incorporating novel components such as partial hybrid transfer learning, discrete wavelet transform (DWT)-based multilayer and multiresolution feature fusion in the encoder, and a dual mode attention gate in the decoder of the multi-resolution U-Net-based GAN. With multi-objective adversarial training loss functions including a unique reciprocal loss for enforcing cooperative learning in pGANs, it further enhances the robustness and accuracy of the segmentation map. MAIN RESULTS: Experimental evaluations conducted on nine diverse publicly available medical image segmentation datasets, including PhysioNet ICH, BUSI, CVC-ClinicDB, MoNuSeg, GLAS, ISIC-2018, DRIVE, Montgomery, and PROMISE12, demonstrate the proposed method's superior performance. The proposed method achieves mean F1 scores of 79.53%, 88.68%, 82.50%, 93.25%, 90.40%, 94.19%, 81.65%, 98.48%, and 90.79%, respectively, on the above datasets, surpass state-of-the-art segmentation methods. Furthermore, our proposed method demonstrates robust multi-domain segmentation capabilities, exhibiting consistent and reliable performance. The assessment of the model's proficiency in accurately identifying small details indicates that the high-resolution generalized medical image segmentation network (Hi-gMISnet) is more precise in segmenting even when the target area is very small. SIGNIFICANCE: The proposed method provides robust and reliable segmentation performance on medical images, and thus it has the potential to be used in a clinical setting for the diagnosis of patients.

Anthelmintic screening of Bangladeshi medicinal plants and related phytochemicals using in vitro and in silico methods: An ethnobotanical perspective.

ETHNOPHARMACOLOGICAL RELEVANCE: Infections caused by parasitic worms or helminth continue to pose a great burden on human and animal health, particularly in underdeveloped tropical and subtropical countries where they are endemic. Current anthelmintic drugs present serious limitations and the emergence of drug resistance has made it increasingly challenging to combat such infections (helminthiases). In Bangladesh, medicinal plants are often used by indigenous communities for the treatment of helminthiases. Knowledge on such plants along with screening for their anthelmintic activity has the potential to lead to the discovery of phytochemicals that could serve as novel molecular scaffolds for the development of new anthelminthic drugs. AIM OF THE STUDY: The purpose of this study was i) to conduct an ethnobotanical survey to gather data on Bangladeshi medicinal plants used in the treatment of helminthiases, ii) to test plants with the highest use values for their in vitro anthelmintic activity, and iii) to carry out in silico screening on phytochemicals present in the most active plant extract to investigate their ability to disrupt ß-tubulin function in helminths. METHODS: The ethnobotanical survey was conducted across three sub-districts of Bangladesh, namely Mathbaria, Phultala and Khan Jahan Ali. The in vitro screening for anthelmintic activity was performed in a motility test using adult Haemonchus contortus worms. Virtual screening using PyRx was performed on the phytochemicals reported from the most active plant, exploring their interactions with the colchicine binding site of the ß-tubulin protein target (PDB ID: 1SA0). RESULTS: The survey respondents reported a total of 32 plants for treating helminthiases. Based on their use values, the most popular choices were Ananas comosus (L.) Merr., Azadirachta indica A.Juss., Carica papaya L., Citrus maxima (Burm.) Merr., Curcuma longa L., Momordica charantia L., Nigella sativa L. and Syzygium cumini (L.) Skeels. In vitro anthelmintic testing revealed that A. indica leaves and bark had the highest activity with LC50 values of 16 mg/mL in both cases. Other plant extracts also exhibited good anthelmintic activity with LC50 values ranging from 16 to 52 mg/mL, while the value for albendazole (positive control) was 8.39 mg/mL. The limonoids nimbolide and 28-deoxonimbolide showed a binding affinity of -8.9 kcal/mol, and satisfied all drug-likeness parameters. The control ligand N-deacetyl-N-(2-mercaptoacetyl)colchicine had a binding affinity of -6.9 kcal/mol. CONCLUSION: Further in silico and in vitro studies are warranted on the identified limonoids to confirm the potential of these derivatives as novel drug templates for helminthiases. The current study supports the need for an ethnobotanical survey-based approach to discover novel drug templates for helminthiases.

Digital twin: Data exploration, architecture, implementation and future.

A Digital Twin (DT) is a digital copy or virtual representation of an object, process, service, or system in the real world. It was first introduced to the world by the National Aeronautics and Space Administration (NASA) through its Apollo Mission in the '60s. It can successfully design a virtual object from its physical counterpart. However, the main function of a digital twin system is to provide a bidirectional data flow between the physical and the virtual entity so that it can continuously upgrade the physical counterpart. It is a state-of-the-art iterative method for creating an autonomous system. Data is the brain or building block of any digital twin system. The articles that are found online cover an individual field or two at a time regarding data analysis technology. There are no overall studies found regarding this manner online. The purpose of this study is to provide an overview of the data level in the digital twin system, and it involves the data at various phases. This paper will provide a comparative study among all the fields in which digital twins have been applied in recent years. Digital twin works with a vast amount of data, which needs to be organized, stored, linked, and put together, which is also a motive of our study. Data is essential for building virtual models, making cyber-physical connections, and running intelligent operations. The current development status and the challenges present in the different phases of digital twin data analysis have been discussed. This paper also outlines how DT is used in different fields, like manufacturing, urban planning, agriculture, medicine, robotics, and the military/aviation industry, and shows a data structure based on every sector using recent review papers. Finally, we attempted to give a horizontal comparison based on the features of the data across various fields, to extract the commonalities and uniqueness of the data in different sectors, and to shed light on the challenges at the current level as well as the limitations and future of DT from a data standpoint.

Power Scavenging Microsystem for Smart Contact Lenses.

On-the-eye microsystems such as smart contacts for vision correction, health monitoring, drug delivery, and displaying information represent a new emerging class of low-profile (≤ 1 mm) wireless microsystems that conform to the curvature of the eyeball surface. The implementation of suitable low-profile power sources for eye-based microsystems on curved substrates is a major technical challenge addressed in this paper. The fabrication and characterization of a hybrid energy generation unit composed of a flexible silicon solar cell and eye-blinking activated Mg-O2 metal-air harvester capable of sustainably supplying electrical power to smart ocular devices are reported. The encapsulated photovoltaic device provides a DC output with a power density of 42.4 µW cm-2 and 2.5 mW cm-2 under indoor and outdoor lighting conditions, respectively. The eye-blinking activated Mg-air harvester delivers pulsed power output with a maximum power density of 1.3 mW cm-2 . A power management circuit with an integrated 11 mF supercapacitor is used to convert the harvesters' pulsed voltages to DC, boost up the voltages, and continuously deliver ≈150 µW at a stable 3.3 V DC output. Uniquely, in contrast to wireless power transfer, the power pack continuously generates electric power and does not require any type of external accessories for operation.

Utilization of battery waste derived ZnO in the removal of dye from aqueous solution: A waste to wealth approach.

Every year a huge amount of zinc carbon batteries is discarded as waste and the management of such waste has become a growing concern all over the world. However, from these waste carbon batteries different kinds of valuable materials could be recovered. On the other hand, different industries discharged large volumes of dye wastewater into the environment which has a profound impact on environment and as well as human health. In this study, ZnO was recovered from the waste carbon batteries through pyrometallurgy process and utilized it for the treatment of methylene blue and methyl orange dye water. The batch adsorption process was carried out to observe the effect of adsorbent dosage, pH, contact time, stirring speed and temperature. Under the obtained optimal conditions adsorption kinetics (Pseudo-first order and pseudo-second order) and adsorption isotherms (Langmuir, Freundlich and Temkin) were analyzed. The results disclosed that 0.5 g and 0.6 g of ZnO showed maximum removal efficiency for MB and MO dye solution (50 ppm) whereas pH 13 and 6 were the optimal for MB and MO respectively. Kinetic studies indicate that both the adsorption processes were pseudo-second order. It was also revealed that based on regression coefficient R2 value the adsorption of MB and MO on ZnO is followed Langmuir model. Furthermore, the findings revealed that the MO adsorption on ZnO is a chemical adsorption process and MB adsorption is a physical adsorption process.

Pharmacological Activities of Plant-Derived Fraxin with Molecular Mechanisms: A Comprehensive Review.

Fruits and vegetables serve not only as sources of nutrition but also as medicinal agents for the treatment of diverse diseases and maladies. These dietary components are significant resources of phytochemicals that demonstrate therapeutic properties against many illnesses. Fraxin is a naturally occurring coumarin glycoside mainly present in various species of Fraxinus genera, having a multitude of therapeutic uses against various diseases and disorders. This study focuses to investigate the pharmacological activities, botanical sources, and biopharmaceutical profile of the phytochemical fraxin based on different preclinical and non-clinical studies to show the scientific evidence and to evaluate the underlying molecular mechanisms of the therapeutic effects against various ailments. For this, data was searched and collected (as of February 15, 2024) in a variety of credible electronic databases, including PubMed/Medline, Scopus, Springer Link, ScienceDirect, Wiley Online, Web of Science, and Google Scholar. The findings demonstrated favorable outcomes in relation to a range of diseases or medical conditions, including inflammation, neurodegenerative disorders such as cerebral ischemia-reperfusion (I/R) and depression, viral infection, as well as diabetic nephropathy. The phytochemical also showed protective effects such as osteoprotective, renoprotective, pulmoprotective, hepatoprotective, and gastroprotective effects due to its antioxidant capacity. Fraxin has a great capability to diminish oxidative stress-related damage in different organs by stimulating the antioxidant enzymes, downregulating nuclear factor kappa B and NLRP3, and triggering the Nrf2/ARE signaling pathways. Fraxin exhibited poor oral bioavailability because of reduced absorption and a wide distribution into tissues of different organs. However, extensive research is required to decipher the biopharmaceutical profiles, and clinical studies are necessary to establish the efficacy of the natural compound as a reliable therapeutic agent.

Impact of the COVID-19 pandemic on child malnutrition in Selangor, Malaysia: A pilot study.

BACKGROUND: Child malnutrition risk factors are globally recognized, but the specific impact of the COVID-19 pandemic on the prevalence of child malnutrition, considering socioeconomic burdens and changes in family lifestyles, remains underexplored. This study aims to identify the significance of COVID-19-related factors in relation to the prevalence of child malnutrition in Selangor, Malaysia. METHODS: Purposive sampling was employed in this pilot study to select the households with under-5 children and, a structured questionnaire was developed to gather data. Chi-squared tests, logistic regression modelling and World Health Organisation AnthroPlus software-based visualization were used for analyses. RESULTS: The present study's findings indicate that demographic and social factors, including 'Citizenship,' 'Type of House,' 'Number of Earning Members,' 'Father's Highest Educational Level,' and 'Number of Children in a Family,' have a statistically significant association with Wasting. Additionally, the mother's 'Highest Educational Level' is found to be linked to underweight prevalence. Within COVID-19 factors, "COVID-19 Impact on Employment/Business" demonstrated significance for both stunting and wasting. Multivariate analysis revealed disparities in childhood malnutrition by gender, age, and factors such as "COVID-19 impact on children's physical activity" and "COVID-19 impact on children's decrease in health over the last two weeks." CONCLUSIONS: This study identified COVID-19 factors alongside sociodemographic variables with statistically significant relationships impacting childhood malnutrition in Selangor, Malaysia. The results underscored the substantial influence of the COVID-19 pandemic on child malnutrition prevalence. Decision-makers at family and community levels can benefit by considering these factors in their actions. However, the study's limitation lay in its dataset, urging larger-scale analyses to explore further sub-categories of the examined variables.

Prevalence and Associated Factors Related to Tobacco Consumption Among University Students in Malaysia.

Tobacco consumption is one of the major public health concerns worldwide. Moreover, alternative tobacco and nicotine products (ATNPs) are growing in popularity, especially among young adults in the past decade. The study aimed to determine the prevalence and associated sociodemographic factors of tobacco consumption among university students. A cross-sectional study was carried out among 338 university students of a private Malaysian university from March to April 2021. Data was collected using a self-administered online questionnaire with items including sociodemographic information, user status of tobacco consumption and types of tobacco product used. Descriptive statistics, Pearson's chi-square test, Fisher's exact test and simple and multiple logistic regression analyses were performed using the IBM SPSS version 26.0 to analyse the data. The prevalence of tobacco consumption in this study was 8.6% and the main tobacco product used was manufactured cigarettes. In Pearson's chi square test and Fisher's exact test, current use of tobacco was significantly associated with nationality, ethnicity, religion, school, current level of education and parents, siblings and friends use of tobacco (p<0.05). In simple and multiple logistic regression analysis, being non-Malaysian, Indian, Muslim, year 4 student and having parents or siblings who used tobacco, all had statistically significant associations with the current use of tobacco (p<0.05). Findings of this study showed that the use of tobacco among university students is concerning and warrants the need to develop and implement a strategic anti-tobacco program to limit this behaviour among university students.

Inhibition of N-type calcium channels by phenoxyaniline and sulfonamide analogues.

Building on previous investigations, structural modifications to the neuronal calcium ion channel blocker MONIRO-1 and related compounds were conducted that included replacement of the amide linker with an aniline and isosteric sulfonamide moiety, and the previously used strategy of substitution of the guanidinium group with less hydrophilic amine functionalities. A comprehensive SAR study revealed a number of phenoxyaniline and sulfonamide compounds that were more potent or had similar potency for the CaV2.2 and CaV3.2 channel compared to MONIRO-1 when evaluated in a FLIPR-based intracellular calcium response assay. Cytotoxicity investigations indicated that the sulfonamide analogues were well tolerated by Cos-7 cells at dosages required to inhibit both calcium ion channels. The sulfonamide derivatives were the most promising CaV2.2 inhibitors developed by us to date due, possessing high stability in plasma, low toxicity (estimated therapeutic index > 10), favourable CNS MPO scores (4.0-4.4) and high potency and selectivity, thereby, making this class of compounds suitable candidates for future in vivo studies.

Evaluating arsenic contamination in northwestern Bangladesh: A GIS-Based assessment of groundwater vulnerability and human health impacts.

One of the biggest environmental worries in the world today is the risk of arsenic (As) contamination in groundwater. The Atomic Absorption Spectrometer (AAS) was used in this work to assess the As content in groundwater samples from 38 shallow (27 m) tubewells in northwest Bangladesh to determine the existing situation, potential source(s), and likely health risk of As and other important water quality parameters. The range of arsenic concentrations (µgL-1) was troublesome and greater than the WHO recommended level for drinking water, ranging from 0.50 to 164 (mean ± SD: 20.22 ± 36.46). In groundwater, the concentrations of Fe, and Mn vary from 0.04 to 52.75 mgL-1 (mean ± SD: 4.23 ± 9.68), and 0.23 to 3.27 mgL-1 (mean ± SD: 1.10 ± 0.67). The obtained groundwater samples have pH values ranging from 5.9 to 7.1, which indicates a somewhat acidic to neutral character. Major cations have an average abundance that is as follows: Ca2+ > Mg2+ > Na+ > K+, while major anions have an average abundance that is as follows: HCO3- > Cl- > SO42- > NO3-; Ca2+ and HCO3- are the main cation and anion, respectively. The groundwater in the Rajarampur village was deemed unfit for drinking or irrigation based on analyses of water quality performed using the entropy water quality index. The Ca-HCO3 type of water, in which Ca2+ and HCO3- are the main positive ions and negative ions, is suggested by the Piper tri-linear diagram. It was discovered that silicate weathering regulates the hydro-geochemical activities in groundwater using a bi-variate examination of several hydro-chemical variables. Four major clusters were observed for the water sample. According to reductive dissolution processes and principal component analysis, the arsenic in groundwater is geogenic in origin. Arsenic is discharged from sediment to groundwater by reductive dissolution of FeOOH and MnOOH, as shown by the modest connection between As, Fe, and Mn. The United Nations Environmental Protection Agency's (USEPA) suggested value for probable cancer risk assessment was 10-6, however the probable cancer risk assessment found a higher value, indicating that the population in the study region was at high risk for cancer. Remedial measures for arsenic mitigation include removing arsenic from groundwater after it is extracted, searching for alternative aquifers, and implementing various water-supply technologies such as dugwells, deep tubewells, pond-sand filters, and rainwater harvesting systems.